The Gilbert® 1999GT creates an elegant ambiance for your favorite room, while secretly providing 24-hour, non-stop, silent-capture of filthy, disgusting flies.

Though not as powerful as our larger, traps; the 1999GT goes unrecognized, in the most elegant of dining rooms, hospitals, and hallways; adding a whole new last line of defense against flies, increasing the effectiveness of the overall system, helping to reduce the need for chemical methods.

Front-line strategy emphasizes eliminating flies before they get into processing areas: dumpster tactics, sanitation, judicious use of approved chemical methods, physical exclusion, and the strategic placement (in non-public areas) of more powerful, professional flytraps.

Note that our No-Wall-Fade™ design won't fade or yellow your wall, like competitor's designs. UV light will discolor (fade or yellow) most anything, including wallpaper, tile and even white walls. It's time to replace old-fashioned gimmicks with truly professional flytraps.

Classic 1999GT Features:

Two 15 watt insect attractant lamps (Sylvania #F15T8/350BL/ECO). Replace annually for best performance.

Draws 44 watts of energy. No glueboard bending required.

One Year Warranty (excluding lamps, glueboards)

Dimensions: 24-1/2"W x 9-1/2"H. Depth 6-1/8" to 1-5/8".
Textured Vinyl Models Weight: 7.4 lbs, ShipWt.: 9 lbs.
Polished / Antique Brass Weight: 10 lbs., Ship Wt.: 12 lbs.

Do not forget to consider ADA Guidelines when installing flytraps! (i.e., In halls, corridors, walks, passageways, or aisles, install this trap horizontally with bottom point at least 6' 4" above the floor or with the top of the trap below 27").

FLYING VENUS™ CHOICES: Choose decorative power cord (6 ft., 115v grounded) or hard-wire version. We highly recommend ordering the optional hard-wire version for the aesthetic, cordless look. Universal and keyhole mounting slots provided on all versions.

All Flying Venus™ flytraps are available in four beautiful finishes: Polished Brass, Antique Brass, and Textured Black or White vinyl-coated aluminum.

GLUEBOARDING INSTRUCTIONS

The 225GT holds one or two (even three) large (or regular) glueboard(s).  Glueboards are scored to bend 1/2" edge to help retain insects.

One glueboard tray (and glueboard) fit into the bottom of the trap. A second glueboard tray (and glueboard) slip-in between the lamps on four pegs.

A third, optional glueboard may be wedged into the clip behind the top lamp. A 1/2" bend of this board will help to guide any errant glue or insects away from the back of the trap, onto the glueboard below).