Revolutionary New
`601D-GT
Sticky Don™

The glueboard version of the legendary Don™.
Featuring New
Easy Access Tilt-A-Trays™.

Excellent effectiveness, equal to that of the legendary industrial light trap, the Gilbert® 601T Don™. The new Sticky Don™ features the same versatile corner/flat-wall mounting and wide angle of attraction. Both Don™s make flies an offer they can't refuse.

Insect Attractant: The Sticky Don™ features specially selected Sylvania F40/ 350BL ECO (40 watt) insect attractant lamps. Replace attractant lamps every year (or two) as needed.

`  

To place glueboards in the Gilbert® Sticky Don™: Simply use the knob to tilt-out a Tilt-A-Tray™, remove release paper from glueboard with one continuous pull, and slide glueboards into tray from above.

Each Tilt-A-Tray™ holds two glueboards (see: gilbertinc.com/glueboard.htm for more indepth instructions).

Up to nine glueboards may be used in the Gilbert® Sticky Don™, four in the Tilt-A-Trays™, four in clips inside the trap, and there's room for a small one in the tray at the bottom of the trap. Replace glueboards frequently, at least as often as codes require).

Four (optional) glueboards may be wedged into the clips provided inside the trap, two on each side. A ninth glueboard may be cut down to size, to fit in the lowest slide-out tray. Change glueboard(s) regularly, at least as often as codes require.

Installation: Thin 4 3/4" wall-hugging profile. Flat-Wall or vertical Corner mount with keyhole slots. Generally speaking, low positioning yields best results for any ILT against flies.
Construction Features:
Frame and interior structure made of aluminized steel (lifetime auto muffler material).
Electrical: Six foot, 3-wire grounded power cord. Standard 115v/60hz.
Maintenance: Nickel-chrome plated guard door swings open for easy access to lamps and reflectibve sufaces for periodic cleaning and lamp replacement. Interlock switch automatically shuts off lamp when guard door is opened.


Dimensions:
54 3/16" x 16" x 4 3/4"
Weight: 28 lbs., Ship Wt: 37 lbs.

FIVE YEAR WARRANTY: (Excluding lamps and glueboards).

601D-GT Mounting Templates:
Keyhole slots on back of unit for flat-wall mounting are 5.250" apart.
Click on image below to download full size mounting template in PDF format.

Keyhole slots on back of unit for corner mounting should be marked as shown below.
Click on image below to download full size mounting template in PDF format.


Made in the USA of US and imported parts.
Buy Our Traps, Create US Jobs!

Gilbert Industries, Inc. 5611 Krueger Drive, Jonesboro, AR 72401
TOLL FREE: (800) 643-0400 PHONE: (870) 932-6070 FAX: (870) 932-5609
E-MAIL:
mailbox@gilbertinc.com
Site Created: August 1996 Copyright© 1996-Today, Gilbert Industries, Inc.