Glueboard ILTs

 


2000GT Flying Venus

Sets a new standard for wall-sconce ILTs
Printer Friendly 2000GT Cut Sheet PDF



US Patent #5,974,727
  It's the greatest! It's so pretty. It mounts like a butterfly and sticks flies and bees.

It's trimmed-down, downright skinny (only 2-3/4" deep) and, yet, most powerful. The 2000GT creates an elegant ambiance for your favorite room, while secretly providing 24-hour, non-stop, silent-capture of filthy disgusting flies.

Though not as powerful as our larger, industrial traps; the Flying Venus™ line goes where no ILT has gone before; unrecognized, in the most elegant of dining rooms or hospital hallways; adding a whole new last line of defense against flies, increasing the effectiveness of the overall integrated pest management system, helping to reduce the need for chemical methods.

Front-line strategy emphasizes eliminating flies before they get into operating rooms or processing areas: dumpster tactics, sanitation, the judicious use of approved chemical methods, physical exclusion, and the strategic placement (in non-public areas) of more powerful, professional ILTs.

Note that our No-Wall-Fade™ design won't fade or yellow your wall, like open top designs. UV light will discolor (fade or yellow) most anything, including wallpaper, tile and even white walls. The 2000GT is the new world champion of decorative wall-sconce ILTs.

 

FLYING VENUS®; CHOICES: Choose decorative power cord (6 ft., 115v grounded) or hard-wire version. We highly recommend ordering the optional hard-wire version for the aesthetic, cordless look. May be ordered with shorter cord. Universal and keyhole mounting slots provided on all versions.

All Flying Venus ILTs are available in four beautiful finishes: Polished Brass, Antique Brass, Textured Black or White vinyl-coated aluminum.

2000GT features:

Two, superior, 20 watt insect attractant lamps (Sylvania #F20T12/350BL/ECO).

Lamp replacement info.

Draws 43 watts of energy.

One Year Warranty (excluding lamps, glueboards)

Mount horizontally with point down.

Dimensions: 24-3/4"W x 11-1/2"H. Depth slopes 2-3/4" to 1-7/16"
Textured Vinyl Weight: 6.72 lbs, ShipWt.: 8 lbs.
Polished / Antique Brass Wt.: 8.16 lbs., Ship Wt.: 10 lbs


 

GLUEBOARDING INSTRUCTIONS

 


2002GT Flying Venus


 
Printer Friendly 2002GT Cut Sheet PDF

  The Gilbert® 2002GT provides:

Standard setting fly-catching for wall-sconce ILTs,

Holds our large 22 x 5" glueboard, flat.

And features easy glueboard replacement (No half-board bend required).

The new Flying Venus™ adds a whole new last line of defense against flies, increasing the effectiveness of the overall integrated pest management system, helping to reduce the need for chemical methods.

Front-line strategy emphasizes eliminating flies before they get into operating rooms or food processing areas: dumpster tactics, sanitation, the judicious use of approved chemical methods, physical exclusion, and the strategic placement of additional, at least one, larger, more powerful, professional ILT.

Note that our No-Wall-Fade design won't fade or yellow your wall, like open top designs.

FLYING VENUS®; CHOICES: Choose decorative power cord (6 ft., 115v grounded) or hard-wire version. We highly recommend ordering the optional hard-wire version for the aesthetic, cordless

All Flying Venus ILTs are available in four beautiful finishes: Polished Brass, Antique Brass,and Textured Black or White vinyl-coated aluminum..

2002GT features:

Two specially selected insect attractant lamps (Sylvania #F20T12/350BL/ECO).
Never judge a lamp by it's wattage. The rest of the numbers count too!
Lamp replacement info.

Mount horizontally with point down.

Draws 43 watts of energy.

One Year Warranty (excluding lamps, glueboards)

Dimensions: 24-3/4"W x 11-1/2"H. Depth slopes 5-7/8" to 1-7/16
Textured Vinyl-Covered Aluminum Weight: 8 lbs, ShipWt.: 11 lbs.
Polished Brass or Antique Brass Wt.: 11 lbs., Ship Wt.: 13 lbs.

Holds Large 22" x 5" Glueboard, Flat (No Half-Board Bend Required).

*You may bend 1/2" back edge of glueboard up to help retain insects when glueboard is removed.


GLUEBOARDING INSTRUCTIONS


 


2012GT Flying Venus


Printer Friendly 2012GT Cut Sheet PDF

  The Gilbert® 2012GT creates an elegant ambiance for your favorite room, while secretly providing 24-hour, non-stop, silent-capture of filthy, disgusting flies.

Though not as powerful as our larger, traps; the 2012GT goes unrecognized, in the most elegant of dining rooms, hospitals, and hallways; adding a whole new last line of defense against flies, increasing the effectiveness of the overall system, helping to reduce the need for chemical methods.

Front-line strategy emphasizes eliminating flies before they get into processing areas: dumpster tactics, sanitation, judicious use of approved chemical methods, physical exclusion, and the strategic placement (in non-public areas) of more powerful, professional ILTs.

Note that our No-Wall-Fade design won't fade or yellow your wall, like open top designs. UV light will discolor (fade or yellow) most anything, including wallpaper, tile and even white walls. Mount horizontally with point down.


FLYING VENUS™ CHOICES: Choose decorative power cord (6 ft., 115v grounded) or hard-wire version. We highly recommend ordering the optional hard-wire version for the aesthetic, cordless look. May be ordered with shorter cord. Universal and keyhole mounting slots provided on all versions. All Flying Venus™ ILTs are available in four beautiful finishes: Polished Brass, Antique Brass, and Textured Black or White vinyl-coated aluminum

2012GT Features:

Two 15 watt insect attractant lamps (Sylvania #F15T8/350BL/ECO). Lamp replacement info.

Draws 27 watts of energy. No glueboard bending required.

One Year Warranty (excluding lamps, glueboards)

Dimensions: 24-1/2"W x 9-1/2"H. Depth 6-1/8" to 1-5/8".
Textured Vinyl Models Weight: 7.4 lbs, ShipWt.: 9 lbs.
Polished / Antique Brass Weight: 10 lbs., Ship Wt.: 12 lbs.

GLUEBOARDING INSTRUCTIONS


225GT Sticky Fox

Wall-Mount or Under-Counter Glueboard ILT
Printer Friendly 225GT Cut Sheet PDF

  The Gilbert® Sticky Fox out-catches competitors whether it's wall-mounted or mounted under-counter.

It features large, double glueboard capacity; and silent-capture at a low, stunless price.

Two new removable glueboard trays are included with each 225GT.

The 225GT holds one or two (even three) large (or regular) glueboard(s). One glueboard tray (and glueboard) fit into the bottom of the trap.

A 2nd glueboard tray (and glueboard) slip-in between the lamps on four pegs.

A 3rd, optional, glueboard may be wedged into the clip behind the top lamp. A 1/2" bend of this board will help to guide any errant glue or insects away from the back of the trap, onto the glueboard below).


Insect Attractant: Two standard Sylvania F20T12/350BL/ECO (20 watt) lamps contain superior 350BL/ECO phosphor. Lamp replacement info.
Installation: Wall-mount with keyhole slots or mount under-counter with screws. Generally speaking, low positioning yields best results for any ILT against flies.
Electrical: Six foot, 3-wire grounded power cord. Standard 115v/60hz. Draws 43 watts (RMS meter).
Maintenance: Stainless steel guard swings up for easy access to lamps and glueboard(s) for periodic cleaning / replacement. Change glueboard(s) regularly, at least as often as codes require. Change lamps annually.
Construction Features: Stainless steel  including swing-up guard. Thin 3-5/8" wall-hugging profile.
Dimensions: 27-5/8" x 11-3/8" x 3-5/8".
Weight: 12 lbs, ShipWt.: 13 lbs.

FIVE YEAR WARRANTY: (Excluding lamps only)


.

  
GLUEBOARDING INSTRUCTIONS
 


215GT Sticky LittleFox


Wall-Mount or Under-Counter Glueboard ILT
Printer Friendly 215GT Cut Sheet PDF

The Gilbert® Sticky Little Fox™ can be wall-mounted
or mounted under-counter. It features stainless steel
construction (guard door included), easy maintenance;
and silent-capture at a low, stunless price. Now, with
two glueboard trays.

Insect Attractant: Two standard Osram Sylvania F15T8/350BL (15 watt) lamps contain 350BL phosphor.

Installation: Wall-mount horizontally with keyhole slots or mount under-counter with screws. Generally speaking, low positioning yields best results for any flytrap against flies.

Electrical: Six foot, 3-wire grounded power cord. Standard 115v/60hz.
Maintenance: Stainless steel guard swings up for easy access to lamps and glueboard(s) for periodic cleaning / replacement.
Two glueboard trays are now standard. Change glueboard(s) regularly, at least as often as local codes require. Change lamps annually.

Construction Features: Stainless steel (Including guard door). Thin 3-5/8” wall-hugging profile.

FIVE YEAR WARRANTY: (Excluding lamps and glueboards).

Dimensions: 21 5/8" x 11 3/8" x 3 5/8"
Weight: 12 lbs., Ship Wt: 13 lbs.

The Sticky Little Fox™ will hold one XL and two standard boards:
280 sq. inches of sticky trapping area!

NEW Gilbert® 215GT Sticky Little Fox™ accepts both the new XL and/or classic glueboards.

XL Glueboard inserts into clip in back of new 215GT trap.

XL glueboards are perforated for tearing into two standard size boards.
Standard size boards (new or classic), slip into the removable trays and/or the clip.


 


219GT Sticky Tiger

Wall-Mount Glueboard ILT
Printer Friendly 219GT Cut Sheet PDF

[219.gif]

  The Gilbert® 219 Sticky Tiger™ outcatches competitors, features double-glueboard capacity, silent capture, and can be wall-mounted or used as a portable.

Insect Attractant: Two standard Sylvania F20/350BL/ECO (20 watt) lamps.
Lamp replacement info.
Installation: Wall-mounted with keyhole slots or used as a free-standing portable (handle / 3 mar-resistant feet included). Low positioning almost always yields the best results for any ILT against flies. However, a special edition with eyebolts is available for hanging.
Electrical: Six foot, 3-wire grounded power cord. Standard 115v/60 Hz.. Draws 43 watts (RMS Meter).
Maintenance: Spring-locked tray conceals glueboard, is secure, and yet easy to service. Nickle chrome guard swings up for easy access to lamps for cleaning and/or replacement. Change glueboard regularly, at least as often as codes require.
Construction Features: Frame and interior structure are aluminized steel for strength. Beautifully finished in anodized aluminum with nickle chrome guard.
Dimensions: 28" x 10 1/2" x 5 3/4"
Weight: 13 lbs., Ship Wt: 16 lbs.
FIVE YEAR WARRANTY (Excluding lamps, glueboards

)

 

 

GLUEBOARDING INSTRUCTIONS


601GT Sticky Lizard


Printer Friendly 601GT Cut Sheet PDF

Lizard Wing
(w/glueboard
inserted)

GLUEBOARDING
INSTRUCTIONS

 


The much anticipated, Gilbert® Sticky Lizard™ is here!
Finally, a Gilbert® quality glueboard ILT that cornermounts, mounts flat on a wall (vertically or horizontally), and, when necessary, may even be hung from eyebolts. Call it unique and versatile.

You can get your Lizard with or w/o wings (shown above and at right). These (optional) Lizard wings reduce effectiveness a bit, but hide glueboards (and captured insects) from view. A different concealment strategy, black glueboards, are also available.

The Sticky Lizard™ features specially selected Sylvania F20T12/ 350BL/ECO (20 watt) insect attractant lamps, the reigning champ for 40 years. Lamp replacement info.

Six foot, 3-wire grounded power cord. Standard 115v/60hz.

Guard door swings open for easy access to lamps, lizard wings, and glueboard(s) for periodic cleaning / replacement. Change glueboard(s) regularly, at least as often as local codes require. Change lamps annually.

Constructed of Aluminized steel (lifetime auto muffler material). Nickel-chromed guard door.

Dimensions: 30-1/4" x 16" x 3"
Weight: 16 lbs. Ship wt. 22 lbs.

FIVE YEAR WARRANTY: (Excluding lamps and glueboards).

 

OPTIONAL STICKY LIZARD WINGS
Hide Glueboards & Caught Insects:

When vertical, gluebords either slip into standard clips on each side of lamps or are folded, placed into Lizard's wings, and held in place by gravity, guard door and latch.

When horizontal, the primary glueboard slips into a Lizard wing or clip in the bottom of the trap. A second (optional) glueboard will slip into the clip above the lamps

This trap holds one or two of our large
(21-7/8" x 4-7/8"
or standard
(16-7/8" x 4-7/8") glueboard(s).

See Also: gilbertinc.com/glueboard.htm

THE CORNER MOUNT ADVANTAGE of the Gilbert 601 series of traps allow you to place the trap out of traffic (avoiding lift trucks) yet install your
traps down low where they are effective against flies.

 

 


747GT
Sticky Bear

Our Most Powerful Wall-Mount Glueboard ILT
Printer Friendly 747GT Cut Sheet PDF


747gt.jpg

The Gilbert® Sticky Bear™ is our largest, most powerful, glueboard light trap. It rivals the catching ability of a Flying Lion.

Insect Attractant: Two standard Sylvania F40/350BL/ECO (40 watt) lamps. Lamp replacement info.
Installation: Wall-mounted horizontally with keyhole slots. Low positioning almost always yields the best results for any ILT against flies. "Below 5 feet" is the general guideline. About 3 feet or waist high is effective and also easy to maintain.
Electrical: Six foot, 3-wire grounded power cord. Standard 115v/60 Hz.. Draws 89 watts (RMS Meter).
Maintenance: The Bear uses two glueboards. Spring-locked tray conceals glueboards, is secure, and yet easy to service. Nickle chrome guard swings up for easy access to lamps for cleaning and/or replacement. Change glueboards regularly, at least as often as codes require.
Construction Features: Frame and interior structure are aluminized steel for strength. Beautifully finished in anodized aluminum with nickle chrome guard.
Dimensions: 53 1/8" x 13 1/8" x 5 5/8"
Weight: 25.4 lbs., Ship Wt: 34 lbs.

FIVE YEAR WARRANTY (Excluding lamps, glueboards).

 

GLUEBOARDING INSTRUCTIONS

 


601D-GT Sticky Don


The glueboard version of the legendary Don™
Featuring New Easy Access Tilt-A-Trays™.
Printer Friendly 601D-GT Cut Sheet PDF

  Excellent effectiveness, equal to that of the legendary industrial light trap, the Gilbert® 601T Don™. The new Sticky Don™ features the same versatile corner/flat-wall mounting and wide angle of attraction. Both Don™s make flies an offer they can't refuse.

Up to nine glueboards may be used in the Gilbert® Sticky Don™, four in the Tilt-A-Trays™, four in clips inside the trap, and there's room for a small one in the tray at the bottom of the trap. Replace glueboards frequently, at least as often as codes require). Clean lamps when catching power no longer meets your needs.

Insect Attractant: The Sticky Don™ features specially selected Sylvania F40/ 350BL ECO (40 watt) insect attractant lamps. Replace attractant lamps every year (or two) as needed.

Construction Features: Thin 4 3/4" wall-hugging profile. Frame and interior structure made of aluminized steel (lifetime auto muffler material).
Installation: Flat-Wall or Corner mount vertically with keyhole slots. Generally speaking, low positioning yields best results for any ILT against flies.
Electrical: Six foot, 3-wire grounded power cord. Standard 115v/60hz.
Maintenance: Nickel-chrome plated guard door swings open for easy access to lamps for periodic cleaning and lamp replacement. Interlock switch automatically shuts off lamp when guard door is opened.
Dimensions: 54 3/16" x 16" x 4 3/4"
Weight: 28 lbs., Ship Wt: 37 lbs.
FIVE YEAR WARRANTY (Excluding lamps, glueboards).

To replace glueboards in the Gilbert® Sticky Don™: Simply use the knob to tilt-out a Tilt-A-Tray™. Remove release paper with one continuous pull, and slide glueboard into tray from above. One glueboard in each side of the two trays, sticky-side out.

Four (optional) glueboards may be wedged into the clips provided inside the trap, two on each side. If the fly population is low enough, and only two boards are needed, place them in the lowerT ilt-A-Tray where they are most effective against flies. A ninth glueboard is possible. To be more miserly, cut a glueboard down so it fits and place in the very lowest slide-out tray at the bottom of the unit. It may be the best place to catch flies. Change glueboard(s) regularly, at least as often as codes require. Change lamps annually.

GLUEBOARDING INSTRUCTIONS

 

 


2004GT Leonardo Da Trapi


Revolutionary New ILT Art!
Printer Friendly 2004GT Cut Sheet PDF

Featuring the Mona Lisa Masterpiece

Leonardo features two, superior, 20 watt insect atractant lamps (Sylvania #F20T12/350BL/ECO). Lamp replacement info.

Artfully punched frame swings up for easy access to glueboard, glueboard tra, masterpiece and clear masterpiece tray. Update to a new masterpiece (see: gilbertinc.com/masterpiece.htm). A 2nd (optional) glueboard fits behind masterpiece. Change glueboards regularly, at least as often as local codes require.

Beautiful Antique Brass and Aluminized Steel Construction.

1 Year Warranty (excluding lamps, glueboards and masterpiece).

Choose (1) the standard 6 foot 3-wire power cord or (2) the highly recommended hard-wire version! Yes, we highly recommend the optional hard-wire version for the more aesthetically pleasing, cordless look. Universal knockouts and keyhole mounting slots provided. Mounts horizontally.

Dimensions: 29 1/2" x 15 9/16" x 2 7/8"
Weight: 15 lbs., Ship Wt: 18 lbs

The Gilbert® 2004GT Leonardo Da Trapi™ is the world's first, serious ILT art.
You can stick with Leo's Mona Lisa Masterpiece (included)

or slip-in a masterpiece (or ad) of your own.
Really set yourself apart with premium custom-punched frames.

Leo Will Hold Two Large Glueboards.
(No Glueboard Bending Required)


U.S. Patent #5,950,355

See Masterpiece updates.

Error: Embedded data could not be displayed.